Rotary Filling Machine

INTRODUCTION

SHARP Rotary Filling Machine cum Sealing Machine is versatile, stand on stainless still legs with easily height adjustable system. Its frame is built on sturdy welded steel and completely enclose in stainless still sheet and doors to helping the servicing of machine. It works on volumetric principle. It satisfies the standard feature of machine – No Container No Filling and Sealing.

OPERATION:

The container rotating on S.S. slat conveyor and continually filled by filling nozzle with the help of feed worm and in-let star wheel. The base of filling operation consists of volumetric filling head and liquid reservoir tank. This tank continuously filled with liquid by outer source. The fill level of liquid in the tank is automatically controlled through sensor with the help of float switch. There is a screw to adjust the fill volume which is also used for change the volume of all syringes.

After completing the filling process the star wheel brings the container below the sealing head. At that time the bottle pick up a cap and the sealing head perform the perfect operation of sealing when the body and neck of container takes the right positioned below the rotating head.

TECHNICAL SPECIFICATION:-

Model		SRFS-12/8	SRFS-8/8
Number of Syringe		12	8
Number of Sealing head		8	8
Direction of Movement**		Left to Right
Fill Size***		10 ml to 1000 ML
Electric Specification **	Main Machine	5 HP / 415Volts / 50 Hz.	3 HP / 415Volts / 50 Hz.
	Oriental Bowl	0.5 HP / 415Volts / 50 Hz.
	Conveyor	0.75 HP / 415 Volts / 50 Hz.
Height of Conveyor **		910 mm to 960 mm Adjustable.
Machine Dimensions**		3660 (L) x 1700 (W) x 2400 (H)		1500 (L) x 1750 (W) x 1300 (H)
Case Dimensions		3850 (L) x 1900 (W) x 2400 (H)		1600 (L) x 1600 (W) x 1550 (H)
Net Weight		2650 Kgs		550 Kgs
Gross Weight		3250 Kgs		900 Kgs
Change parts required		(A) Container: Star Wheel, Back Guide, Feed Worm, Nozzle (B) Cap: Die, Delivery chute. (C) Syringes (If volume higher/lower then specification)

INPUT SPECIFICATION:

ROPP Cap Specification	Diameter**	19 mm to 38 mm***
	Height **	15 to 18.3 mm
Container Size**	Round Shape	Ø 22 mm to Ø 100 mm *** Respectively height 58 mm to 240 mm*** (Height option for other bottle height available)
	Flat / Square	15mm to 100 mm (Length)*** Respectively 10mm to 50 mm (Width)*** Respectively height 58 mm X 240 mm*** (Height option for other bottle height available)

*   Depends on bottle size, cap size and type of cap.
** We can supply as per customer requirements.
*** With help of change parts.

SALIENT FEATURES:

• Based on advanced technology
• Perform two operations with single operator
• Requires less floor area
• All contact parts are S.S. 316 & non-contact parts are S.S. 304
• +- 1% accuracy due to piston dozing principle
• No down time in volume settings
• No containers no fill for each head
• Avoid damage of caps during rotation and waste of energy with the help of additional sensors which automatically start and stop the rotary cap sealing.
• Well finished and imported polished, laminated S.S. sheet used
• Separate A.C. drive to control speed of conveyor
• Bottle counter device

OPTIONAL FEATURES:

• PLC based control
• Height adjustment with motor
• Automatic chain washing system
• Inbuilt pre-inspection
• Cap Elevator for feed caps to the cap feeding bowl

BEST SUITABLE FOR

• Syrup
• Honey
• Water
• Milk
• Glycerin
• Juice
• Wine
• Liquor
• Shampoo
• Lotion
• Lubricant oil
• Essential Oil
• Cooking Oil
• Edible Oil
• Engine Oil
• Motor oil
• Liquid Soaps
• Cleaning Chemicals
• Perfumes

UTILITY REQUIREMENT:

Electrical supply            : 3 Phase + Neutral + Ear thing
Electrical load                : 3 KW / 6 KW
Air Pressure: Minimum : 6 bar pressure 0.5 CFM